Filter
Top Products
nüvi 310/360 Owner’s Manual 47
APPENDIX
Removing the nüvi and the Mount
1. To remove the nüvi, press up on the tab on the bottom of the cradle.
2. Lift the nüvi off of the mount.
3. To remove the suction cup from the windshield, flip the lever toward you.
4. Pull the tab on the suction cup toward you.
Removing the Cradle from the Mount
To remove the cradle from the mount arm, turn the cradle to one side. The cradle will
snap off the ball socket.
To replace the cradle, snap the cradle on the ball socket.
Custom POIs (Points of Interest)
Your nüvi accepts custom points of interest (POI) databases, available from various
companies on the Internet. Some custom POI databases contain alert information
for points such as safety cameras and school zones. Your nüvi can notify you with a
proximity alarm when you approach one of these points.
After downloading your POI database, use the Garmin POI Loader to install the POIs
into your nüvi. The POI Loader is available at www.garmin.com/products/nuvi310/ or
www.garmin.com/products/nuvi360/. Select Updates and Downloads.
Using the POI Loader program, you can store the Custom POIs on your “nüvi” drive
or your SD card. You can also customize the proximity alert settings for each POI
using the POI Loader. Refer to the POI Loader Help file for more information; press
F1 to open the Help file.