Filter
Top Products
nüvi 310/360 Owner’s Manual 33
USING AN FM TMC TRAFFIC RECEIVER
USING AN FM TMC TRAFFIC RECEIVER
Using an optional Garmin FM TMC Traffic Receiver, your nüvi can receive and
use traffic information broadcast over the FM Radio Data System (RDS). When a
traffic message is received, your nüvi displays the event on the map and can change
your route to avoid the traffic incident. For more information about FM TMC
Traffic Receivers for the nüvi, visit the Garmin Web site (www.garmin.com). For
participating subscription providers, refer to the Garmin Web site at
www.garmin.com/fmtraffic.
Connecting the FM TMC Traffic Receiver to Your nüvi
Place your nüvi in the auto mount, and plug it into the 12/24-volt adapter. Plug the
Traffic Receiver’s mini-USB cable into the mini-USB connector located on the side of
the nüvi.
NOTE: You can only access the traffic information and settings if the nüvi is
connected to external power and an FM TMC Traffic Receiver, such as a GTM 10.
Connecting the FM TMC Traffic Receiver to the nüvi