Filter
Top Products
Removing UPnP tracks from the queue
1. Press the BROWSE button. The currently playing track name will be displayed.
2. Turn the knob to select the track you want to remove from the queue.
3. Press and hold the STOP button for 2 seconds.
4. Turn the knob to highlight 'Yes' or 'No'.
5. Press SELECT to confirm whether you actually want to delete the track from the queue.
6. If 'Yes' was selected then 'Removed From Queue' will be displayed.
7. To remove all tracks from the queue, keep pressing BACK until the 'Media Player' menu item
is selected, press SELECT and then turn the knob to select 'Clear Queue' and press SELECT
again.
Playing UPnP tracks in random order
1. Select the individual tracks as described previously.
2. Navigate to top-level menu item 'Media Player' using the SELECT and BACK buttons.
3. Press the SELECT button.
4. Turn the knob until 'Playback Mode' is displayed.
5. Press the SELECT button.
6. Turn the knob until 'Shuffle' is display.
7. Press the SELECT button.
8. Turn the knob to select YES/NO to confirm that shuffle mode should be enabled.
Playing UPnP tracks in the queue repeatedly
1. Select the individual tracks as described previously.
2. Navigate to top-level menu item 'Media Player' using the SELECT and BACK buttons.
3. Press the SELECT button.
4. Turn the knob until ' Playback Mode' is displayed.
5. Press the SELECT button.
6. Turn the knob until 'Repeat' is displayed.
7. Press the SELECT button.
8. Turn the knob to select YES/NO to confirm that repeat mode should be enabled.
Note:
1. If the shared folders contain more songs than the Internet Radio memory limit, it will display
“Too many files”
2. Repeatedly pressing button P4 will toggle the Repeat and Shuffle modes.
Setting the clock
1. Press the SELECT button. (Note: if you make a mistake at any point, press the BACK button
go back to the previous screen.)
2. Turn the knob until the display says <Configure>
3. Press the SELECT button.
4. Turn the knob until the display says <Clock Setup>
Stations
Media Player
< Configure >
Register
< Clock Setup >
Backlight
US-20