Filter
Top Products
8
VIDEO PROCESSOR
The primary connection from the video processor to
the display is the DVI cable. If an analog signal will
be used through the pass-through on the processor
(HDTV or PC, for example), the analog RGBHV cables
should also be connected.
SOURCES
DVD – Connect the S-video or component signals to the
processor. Interlaced signals are preferred over
progressive.
VHS – Connect the composite signal to the processor.
Video Game – Connect the composite or S-video signal
to the processor.
Standard Satellite Receiver
(Non-HDTV) – Connect the S-video signal to the
processor.
HDTV Satellite Receiver – Connect the S-video signal
to the processor. For the HDTV signals there are
three options:
1. Connect the YPrPb or RGB signals directly to
the alternate inputs of the plasma
2. Connect the YPrPb signal to the BNC inputs
on the processor.
3. Connect the YPrPb or RGB signals to the D15
connector on the processor.
When viewing non-HDTV channels use the S-
video connector for best results.
HDTV Satellite Receiver with DVI – Connect both the
DVI cable and the analog YPrPb cables to either the
video processor (pass-through) or directly to the plasma.
When viewing HDTV channels with HDCP (copy
protection encoding), use the analog signals from the
satellite receiver to view the image. Also use the Analog
RGBHV signals from the processor.
Computer Signals – Connect the RGB to either the D15
on the processor or connect directly to the plasma.
Connections