Filter
Top Products
Connecting DSP5000C 44
DSP5000C User Guide
If you are using a Meridian 201 or 603 and a Meridian 200- or
600-Series CD player
Unless you have an older M-lead (as opposed to M5 lead) you will need to
obtain an SP5 adapter. An M-lead has two DIN plugs at one end and this
is the end to connect to the preamplifier. The SP5 adapter allows an M5-
lead to connect to 200-Series products.
1. Connect the phono plug at the far end of the M5-lead (from the
master) to the digital output of the CD player
2. Connect the analogue output of the 201 or 603 to an analogue–digital
converter such as the Meridian 607
3. Connect a second digital audio lead (not provided) between the D2
input of the master DSP5000C and the digital output of the 607
4. Connect the SP5 adapter to the DIN plug at the far end of the M5-lead
(from the master)
5. Locate the two added DIN plugs. Connect one of these to the socket
marked 200 COMMS on the rear of 207 or 208
6. Connect the other DIN plug to the socket marked 200 COMMS on the
rear of the 201, or 600 COMMS on the 603
7. Configure the DSP5000C for Type 3 (see page 30)
8. Set up the 603 according to its user manual
If you have a Meridian 601 preamplifier and a Meridian 200-or
600-Series CD player
The 601 will control all analogue and digital sources.
Unless you have an older M-lead (as opposed to M5 lead) you will need to
obtain an SP5 adapter. An M-lead has two DIN plugs at one end and this
is the end to connect to the preamplifier and CD player. The SP5 adapter
allows an M5-lead to connect to 200-Series preamplifiers.
1. Connect the phono plug at the far end of the M5-lead (from the
master) to one of the 601's digital outputs – normally, use output 1
2. Connect the SP5 adapter to the DIN plug at the far end of the M5-lead
(from the master)
3. Locate the two added DIN plugs. Connect one of these to the socket
marked 200 COMMS or 600 COMMS on the rear of the CD player
4. Connect the other DIN plug to the socket marked 600 COMMS on the
601
5. Configure the DSP5000C for Type 3 (see page 30)
6. Set up the 601 according to its user manual
If you have a Meridian 200- or 600-Series preamplifier, CD
player and a tuner
Unless you have an older M-lead (as opposed to M5 lead) you will need to
obtain an SP5 adapter. An M-lead has two DIN plugs at one end and this
is the end to connect to the preamplifier and CD player. The SP5 adapter
allows an M5-lead to connect to 200-Series preamplifiers.
1. Connect the SP5 adapter to the DIN plug at the far end of the M5-lead
(from the master)
1. Connect one of the DIN plugs on the free end of the SP5 adapter to
the socket marked 200/600 COMMS on the CD player
2. Connect the other DIN plug on the M5-lead to the socket marked CD
on the tuner
3. Use the Q-lead to connect the socket marked 200/600 COMMS on the
preamp to the socket marked 201/2 or Preamp on the tuner