Filter
Top Products
VNR 100 • Reference Information 20
Reference
Information
This section provides information about:
• Default Factory Settings
• VN-Matrix Port Usage
• Included Parts
• Mounting the VNR 100
Default Factory Settings
Network settings (ETH0) IP address
192.168.254.254
Subnet mask
255.255.255.0
Gateway address
192.168.254.253
Controller IP address
192.168.254.254
Port
5432
Configuration User name
config
Password
config
VN-Matrix System Port Usage
The VN-Matrix system uses a variety of network port numbers for streaming and inter-
communication functions. Just as the universal “telnet” function typically uses TCP port
number 23, VN-Matrix uses specific port numbers for its operation.
The table on the following page lists the port numbers used by the VN-Matrix series
products. The port numbers are, in most cases, for the sender. Port numbers used for
receiving are less important in regards to security.
When configuring a network, make sure it allows traffic on the ports required for your given
application. The ports highlighted in yellow accommodate most simple applications.