Filter
Top Products
2-15USP 405 • Installation and Operation
Available Scaler Output Resolutions and Rates
Resolution 50 Hz 56 Hz 60 Hz 75 Hz Lock @ 50/60* 85 Hz
640 x 480 X X X X
800 x 600 X X X X
832 x 624 X X X
848 x 480 X X
852 x 480 X X
1024 x 768 X X X X X
1280 x 768 X X
1280 x 1024 X X X
1360 x 765 X X
1365 x 1024 X X
1400 x 1050 X X X
HDTV 576p X X
HDTV 720p X X
HDTV 1080p X X
HDTV 1080i X X X
NTSC
PAL
* Rate is auto-selected based on input.
The default resolution and rate is 640 x 480 @ 60 Hz.
Output Signal (RGB format) submenu
Using either the horizontal Adjust ( ) or vertical Adjust ( ) knob, select the
output format required by the display: RGB (default) or component (Y, R-Y, B-Y).
Sync Polarity submenu
The display or projector may require a particular combination of horizontal (H)
and vertical (V) sync signal polarities. Select the appropriate combination of
positive or negative H and V sync by rotating either the horizontal Adjust ( ) or
the vertical Adjust ( ) knob.
Memory Presets
The following flowchart provides an overview of the Memory Presets submenus
and the options for each setting.
The presets save only the Sizing and Centering adjustments for the selected
output rate. If you change the output and then recall a preset for the earlier
rate, the adjustments recalled in the preset have no effect on the video output.
However, if you then change back to the earlier output rate, the preset
adjustments affect the video output.
Save memory presets submenu
From this submenu, the sizing and centering information for the currently
selected input can be saved to memory. Up to three memory presets can be saved
per input: presets 1, 2, and 3.