Filter
Top Products
G4000A OPERATION MANUAL
9
DIRECT FREQUENCY ENTRY
If you know the exact frequency of the station
you want to hear, directly enter it using the keypad
and immediately press the FREQU./METER button.
Pressing the FREQU./METER button finalizes the
entry. Be sure to include the decimal point in FM
frequencies.Any kind of frequency may be entered
regardless of what kind of frequency you are
presently tuned to, e.g. you can enter an FM
frequency even if you are presently in shortwave.
AM STATION EXAMPLE: to tune the frequency
810 kilohertz in the AM band, press 8 1 0 , then
press the FREQU./METER button.
FM STATION EXAMPLE: to tune the frequency
105.7 megahertz in the FM band, press 1 0 5 . 7,
then press the FREQU./METER button. Be sure to
include the decimal point in FM frequencies.
SHORTWAVE STATION EXAMPLE: to tune the
frequency 5975 kilohertz in the shortwave 49 meter
band, press 5975 then the FREQU./METER button.
HOW TO USE THE
STEREO/MONO SWITCH (left
side of the radio)
For true stereo reproduction in FM, select STEREO
when you use earphones or headphones.When
STEREO is selected, and the broadcast is in stereo,
two circles appear above and to the right of the
frequency in the display. Use the MONO position
whenver reception is poor or marginal.
HOW TO USE THE TONE SWITCH
Experiment and let your ears judge which position,
HIGH or LOW, you like best.
GENERAL RADIO OPERATION continued
8
5 GENERAL RADIO OPERATION
HOW TO TURN THE RADIO ON
AND OFF
Press the ON/OFF button.
HOW TO LISTEN TO YOUR LOCAL
AM STATIONS
1. On the G4000A, the AM broadcast band is
called medium wave.When you are listening to AM,
the letters “MW” appear in the display.
2. Press the ON/OFF button to turn the radio on.
3. Press the AM button several times, until MW
appears near the center of the display.
4. If “STEP” appears in the display, press the STEP
button to choose 10 KHz tuning rate.
5.Automatically tune using the AUTO TUNING
button.The radio will automatically stop on stations.
A quick press-and-release tunes up-frequency; a long
press-and-release tunes down-frequency.
6. Manually tune using the TUNING button.
HOW TO USE THE WIDE/NARROW
SWITCH (left side of radio)
Experiment with this switch and let your ears be your
guide.WIDE gives the best audio fidelity; NARROW
best minimizes interference from other nearby stations.
This switch is used for AM, shortwave, and longwave
listening.
HOW TO LISTEN TO YOUR LOCAL
FM STATIONS
1. Press the FM button.
2.Automatically tune using the AUTO TUNING
button.The radio will automatically stop on stations.
A quick press-and-release tunes up-frequency;
a long press-and-release tunes down-frequency.
3. Manually tune using the TUNING buttons.