Filter
Top Products
18
7 WORKING WITH MEMORY continued
CODE
NO.
DESCRIPTION
8 SYSTEM SET CODES AND THE SYSTEM SET
CODE TABLE
E100 OWNER’S MANUAL
page having 25 memories, for a total of 200 memories. You can
change this set-up. The number of memory pages can be set to
your choice of 4, 5, 8 or 20. This changes the number of frequencies
stored per page, but in all cases, 200 total frequencies can be stored.
To see the details of these changes and to make these changes
please see the instructions titled SYSTEM SET CODE TABLE, on
Pages 21-23.
Please review the System Set Code Table, below. System Set Codes
allow the radio to be tailored to your needs by changing certain
programmable functions. These functions and their descriptions are
noted in the table.
SHOWN IN
DISPLAY
Alarm uses radio station on page 1, Mem 1 AL. 1
Alarm uses last radio station tuned AL. 2
Divide the memories into 4 pages with P4: 50
50 locations
Divide the memories into 5 pages with 40 locations P5: 40
Divide the memories into 8 pages with 25 locations P8: 25
Divide the memories into 20 pages with 10 locations P20: 10
Set the tuning steps for MW (AM) to 9KHz 9KHz
Set the tuning steps for MW (AM) to 10KHz 10KHz
Set the clock system to 12Hr 12H
Set the clock system to 24H 24H
Check all the segments on LCD display and model no. All LCD
segments show
Rechargeable battery to be used 1.2
01*
02*
04
05
08
20
09*
10*
12*
24*
22
28*