Filter
Top Products
16
7 WORKING WITH MEMORY continued
E100 OWNER’S MANUAL
Memory Auto-Scan
Memory Auto-scan enables scanning through the memories within
the selected memory page. Each lled memory is accessed for about
5 seconds, after which the scan move on to the next used memory
automatically, staying on it for about 5 seconds. This continues
indenitely on the selected page until deliberately stopped. Unused
memories are not accessed.
1. Press/release the M.Scan/Page button.
2. Press/hold either the Up/Hour or Down/Min. button for about 3
seconds. Then release it. Note that the memory number in the
upper right corner of the display ashes and the preset being
scanned remains for about 5 seconds. It then moves on to the
next memory preset for another 5 seconds.
To stop memory preset auto-scan, press/release either the Up/Hour
or Down/Min. button.
MOVING A STORED FREQUENCY
If desired, a frequency that has been stored into a memory can be
moved to a different memory on the same page, or a different page.
1. Turn on the radio.
2. Press/hold the M.Scan/Page button (7) for about 3 seconds and
release it.
3. Use the Up/Hour or Down/Min. button (5,6) to select the required
memory page.
4. Press/release the M.Scan/Page button twice.