Filter
Top Products
11
ENGLISH
Identifying the Parts (Display)
CD/SACD mode
During playback
Currently playing track number
(This is not displayed when remaining time of disc is displayed.)
Volume (0 to 99)
Elapsed time of current track (min./sec.)
or remaining time of current track (min./sec.)
Changing the display
During playback, each time the DISPLAY button is pressed, the
display changes as follows:
Elapsed time of current track
Remaining time of current track
Remaining time of disc
When playback is stopped
The display shows the type of disc currently loaded (CD or SACD).
“NO DISC” is displayed when no disc is loaded.
COAX/OPT/USB mode
Volume (0 to 99)
Current input
(COAX, OPT or USB)
Sampling frequency
(32k, 44k, 48k, 88k, 96k, 176k or 192k)
< If no input device is connected, or this unit is unable to lock with
that device, instead of the sampling frequency being shown, the
name of the input source will blink. Check the connections.
LINE1/LINE2 (PHONO) mode
Volume (0 to 99) Current input
(LINE1, LINE2 or PHONO)
< When you use LINE2 as PHONO input, select “PHONO” in “L-2”
setting (page 22 “LINE2/PHONO terminal”).
Setup mode
Setup item or setting
Setup indicator