Filter
Top Products
24
Troubleshooting
Symptom Possible Problem Solution
Unit does not respond (no
power)
AC adapter is not plugged
into wall outlet or the
connector in the back of
the Base Station is not
connected properly
Make sure that the AC adapter
is securely connected into
a wall outlet. Unplug and
re-plug the connector to the
power jack on back of the Base
Station(markedDC15V)
iPod does not dock
properly
Wrong dock adapter used See chart to select the proper
docking adapter for your iPod
on page 12
No sound Base Station speaker
muted (iPod or Aux LED
indicator is blinking)
Press MUTE button (iPod or
Aux LED indicator will stop
blinking)
Volumelevelsettoolow Increase volume level using
the+/-keysontheleftsideof
the Base Station
iPod is not playing Check iPod screen to conrm
iPod is playing
Base Station
Wrong source chosen (iPod
or AUX)
Check the source indicator
LEDs to conrm that the
desired source is selected.
Press the SOURCE button to
select between AUX and iPod
Echo sound (delay)
between Base Station
speaker and Wireless
Speaker
Range Extender Switch on Turn range extender o or
move the Wireless Speaker into
another room
Too much bass, treble or
less than optimal sound
iPod EQ settings not
optimized
Set iPod EQ setting (please
see manual section titled
“CustomizingEos”