Filter
Top Products
22
Adding Additional Wireless Speakers/Receivers:
You can link up to 4 Wireless Speakers, placed up to 150 ft away from the Base Station. All Eos
Base Stations, Wireless Speakers/Receivers leave the factory with the same ID setting. This is
done so Speakers/Receivers will link with any Base Station right out of the box. A new Wire-
less Speaker will automatically link with your Base Station as soon as it is turned on.
The Base Station features 4 individual Wireless Speaker link LEDs (marked 1 to 4). The LEDs will
illuminate, indicating the number of Wireless Speakers/Receivers linked to your Base Station.
Note: Due to the incredible range of the Eos system, it is possible for your speakers to receive
audio from a neighbor’s system. If this happens, or if you wish to run more than one Eos system
in your house, you can give your Base Station Speakers/Receivers a unique ID. With a unique ID
set, your Speakers/Receivers will link only to the Base Station that they are paired to.
To set a unique ID for your Eos Wireless system, please see the section titled “Linking Wire-
lessSpeakers/ReceiverstoaSpecicBaseStation”
Antenna LED Indicator:
The Antenna on the Wireless Speaker is equipped with a blue LED that tells the status of
the Wireless Speaker.
• Solid LED = power on, linked with Base Station.
• Blinking LED = power on, not linked with Base Station.
• LED o = Wireless Speaker power o
Note: If the Antenna LED is blinking on the Wireless Speaker; make sure that the transmitter
is activated on the Eos Base Station (blue LED on the Antenna of the Base Station) and/or the
Wireless Speaker is not out of range of the Base Station.
Using Your Eos System