Filter
Top Products
26
• If the cassette feels “tight” while performing operation
shown (see Fig. 2), the tape may be jamming due to
“ridges” formed in the winding of the tape.
(visible through the center window). These may be
removed, in most cases, by fast winding of the cassette
from one end to the other and back again.
• Use only well-known brands of tape. Avoid use of C-120 cassettes.
Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch
the tape surfaces.
HEAD CLEANING
The tape heads, pinch roller and capstan require periodic cleaning. This removes
particles of the metal oxide coating that wear off the tape and accumulate on these
parts and impair performance. Switch off the power, press the STOP/EJECT key to
open the cassette door, and press the PLAY key. Clean the tape heads, pinch roller
and capstan with a soft cloth or cotton pad dampened in isopropyl alcohol or special
tape head cleaner.
ERASE RECORD/PLAY PINCH
HEAD HEAD CAPSTAN ROLLER
MS9700_ib021903.p65 19/2/2003, 09:2326