Filter
Top Products
18
6.) Press the lower half (FRONT) of the OPEN/CLOSE button on the front panel,
or the FRONT open button on the remote control, to close the CD drawer. The
player will read the disc that is in the play position and display the total tracks
and playing time of that disc. One of the disc numbers will be flashing to indicate
which disc is in the play position. For each disc on the tray the corresponding
DIRECT ACCESS button on the front panel will light up.
7.) To begin playback of the disc in the play position press the PLAY/PAUSE
button on the front panel or the PLAY button on the remote control. Too
begin playback of a different disc you can press the DISC SKIP button to move
to the next disc, or press one of the 6 DIRECT ACCESS buttons to move
directly to any disc in the player.
8.) When playback begins the half circle icon flashes above the number of the
disc being played, and the DIRECT ACCESS button of the playing disc remains
‘On’.
9.) Adjust the VOLUME, X-BASS controls as desired.
10.)Playback will continue until all tracks on all discs have been played. Then the
player stops and the display shows the total tracks and playing time of the last
disc that played. Press the lower half (FRONT) of the OPEN/CLOSE button
on the front panel, or the FRONT open button on the remote control, to open
the CD drawer. Remove the first 3 discs, close the drawer. Wait until the tray
rotates, press the FRONT OPEN button again and remove the remaining 3
discs.
PAUSE CONTROL
To pause momentarily during playback press the PLAY/PAUSE button on the
front panel or the PAUSE button on the remote control. The sound stops, the
Pause “ ” indicator appears in the display and the appropriate Direct Access
button flashes. However the disc continues to spin. To cancel pause and resume
normal playback press the PLAY/PAUSE button on the front panel or the PLAYY
button on the remote control once more.
MS9700_ib021903.p65 19/2/2003, 9:2318