Filter
Top Products
26
CONTINUOUS PLAYBACK OF TWO CASSETTES
1.) Insert prerecorded tapes into both cassette compartments with the tape you
want to play first in DECK B.
2.) Press the PLAY key of DECK B. to begin playback.
3.) Press PAUSE key and then PLAY key of DECK A.
4.) When the tape in DECK B. ends, it stops and the DECK A. PAUSE key will be
released automatically to begin playback on DECK A.
MAKING A TAPE RECORDING
This cassette recorder features an Automatic Recording Volume Level Control
System that prevents overloaded or distorted recordings. You can change the
volume level as often as you like during the recording process. It will not have any
effect on the volume level of the recording itself.
1.) Insert a good quality blank tape into DECK A with the exposed tape facing
down and the full reel on the left side. Close DECK A door.
2.) Select the source you wish to record – TUNER, CD, or TAPE (Tape Dubbing)
and operate that source as you normally would.
3.) Press the RECORD key on DECK A. to begin recording.
When recording from Cassette B to Cassette A you can press the DUBBING button
to select HIGH SPEED dubbing which allows you to make recordings at
approximately twice the normal recording speed.
BEAT CUT SWITCH (On Back Cabinet)
Occasionally when recording from the AM radio a repetitive whistle or ‘beat’ sound
may be heard. If this occurs slide the BEAT CUT switch to its other position to
eliminate the unwanted sound.
MS9600_ib_0313.p65 25/3/2002, 15:2326