Filter
Top Products
25
CASSETTE OPERATION
PLAYING CASSETTE TAPES
1.) Press the TAPE button to turn the system ‘On’ and select the Tape mode.
2.) Press the STOP/EJECT key of either deck A or deck B to open the cassette
door.
3.) Insert a prerecorded cassette into the slots on the door with the exposed tape
facing down and the full reel on the left side. Close cassette door.
4.) Press the PLAY key to begin playback.
5.) Adjust the VOLUME, EQ, and BASS BOOST controls as desired.
6.) When the tape ends the Automatic Stop System releases the PLAY key and
shuts off the tape motor. Press the STOP/EJECT key to open the cassette
door and remove your tape. To stop the tape before it ends press the STOP/
EJECT key at any time.
F. FWD (Fast Forward) and REWIND CONTROLS
Press F. FWD key or REWIND key to advance or rewind the tape rapidly. When
you reach the desired portion, or the end of the tape, press the PLAY key to resume
normal playback, or press the STOP key to shut off the tape motor.
Note: the Automatic Stop System does not function in the fast forward or rewind
modes.
PAUSE CONTROLS
Press the PAUSE key to stop the tape temporarily. The tape movement stops but
the tape motors continue to run. Press the PAUSE key again to cancel pause
mode and resume normal playback.
MS9600_ib_0313.p65 25/3/2002, 15:2325