Filter
Top Products
16
STORING STATIONS IN THE TUNER MEMORY
The tuner in this system has a 40 station memory. You can store up to 20 AM and
20 FM stations in memory for easy recall at any time.
1.) Press the TUNER/BAND button to turn the system ‘On’ to Tuner function, and
press again to select the desired band if necessary.
2.) Tune to the first station you wish to store
in memory.
Example: FM 98.7 MHz
3.) Press the PROGRAM (CLOCK SET)
button.
The display will show “CH 01” and the
channel indicator (CH) will be flashing.
4.) Press the PROGRAM (CLOCK SET)
button again. Radio station FM 98.7 will
be entered into memory “01” and the
channel display will advance to “CH 02”.
5.) Tune to the next station you wish to store. When the desired frequency appears
in the display press the PROGRAM (CLOCK SET) button to store it in memory.
The channel display advances to the next channel.
6.) Repeat Step 5 until you have entered up to 20 stations on the first band and
then press the TUNER button to change bands and enter up to 20 stations on
the remaining band if desired.
7.) After all desired stations have been stored in the tuner memory press the
STOP button to exit the memory storage mode.
STEREO
TUNER
FM
MHz
STEREO
TUNER
FM
MHz
CH
STEREO
TUNER
FM
MHz
CH
MS9600_ib_0313.p65 25/3/2002, 15:2316