Eiki 8080 Cassette Player User Manual


 
9
Basic Operation
Turning the Power On
Connect the power cord of the 8080 to an AC outlet of appropriate voltage.
The [AC] indicator lights up.
CAUTION:
The 8080 does not have a power switch. When you connect the power cord to the AC outlet, the power to the unit is
turned on.
Stop the CD and cassette tape, and remove the USB flash drive.
Then remove the power cord plug from the AC outlet.
The [AC] indicator turns off.
CAUTION:
The 8080 does not have a power switch. Remove the power cord plug from the AC outlet when you are not using the
unit.
If a USB flash drive has been connected to the [USB] port, first remove the USB flash drive by following the correct
procedure (see page 12), then remove the power cord plug from the AC outlet.
The power cord is tucked inside the compartment on the bottom of the unit. Before you use
the unit, extract the power cord from the compartment. If you plan not to use the unit for a
long period of time, or if you plan to carry or transport the unit, store the power cord in the
compartment.
Power plug
AC outlet
Turning the Power Off
Power plug
Basic Operation