Eiki 8080 Cassette Player User Manual


 
Recording to a USB Flash Drive
19
Recording from a Cassette Tape to a USB Flash Drive
Press the [STOP/EJECT] button in the tape transport section. Alternatively, press the [STOP/CLEAR] button, then press
the [STOP/EJECT] button in the tape transport section.
CAUTION:
If you press the USB [REC] button while the tape is playing, recording will start immediately.
•Audio will be recorded to the USB flash drive in MP3 format with a bit rate of 128kbps. You cannot change this setting.
Please refer to page 25 for information on the folders and files that are created during USB recording.
Changing the volume, tone, or balance during recording will not affect the recording.
1Set the Input Select switch to [USB].
2Insert a cassette tape.
See page 16.
3Connect the USB flash drive to the [USB] port.
See page 13.
4Press the USB [REC] button.
The button blinks red, and the unit enters record
ready mode.
5Press the [PLAY] button in the tape transport
section.
The tape starts playing, and the USB flash drive auto-
matically starts to record (the USB [REC] button
lights up red).
Tips:
Pressing the [PLAY/PAUSE] button during record
ready mode will also start recording.
Pressing the USB [REC] button while recording will
place a track mark (track divider) in the position
where you pressed the button.
DIGITAL DISPLAY
REPEAT 1ALL REMAIN
TRACK NO. TIME
MIN. SEC.
RANDOM
PROGRAM
MEMORY
AUTOMATIC STOP
2 x COUNTER
PUSH
OPEN
VARIABLE PITCH CONTROL
25 RANDOM ACCESS PROGRAM
1
3
254
NOTE:
Tracks will automatically be
recorded to available space on
the drive.
You do not have to locate the
appropriate position to record
(as you would with a cassette
tape).
Stopping recording
Recording