Dynaudio pmn Speaker User Manual


 
54
AIR TECHNICAL SPECIFICATIONS
System:
Total frequency response:
Max. SPL 1m, one (IEC Short Term)
Max. SPL 2m, 5.1 (IEC Short Term)
Precision of monitor matching:
Port tuning frequency:
Internal cabinet volume:
Bass principle:
Woofer:
Mains voltage:
Power consumption:
Finish
Amp:
Cabinet:
Dimensions (H x W x D):
Weight:
Amplifier
Active Subwoofers
25 Hz – bssmng: 120 Hz, LFE: 2.5 kHz/
23 Hz – bssmng: 120 Hz, LFE: 2.5 kHz : +/-3dB
119 dB peak / 121 dB peak
113 dB peak / 115 dB peak (no front, rear & center)
+/- 0.2 dB
30 Hz / 27 Hz
37 liters / 78 liters
Bass reflex
1 / 2 pcs. 240 mm / 10", one-piece molded polyprop cone, 100
mm / 4" pure alu voice coil
100 to 240 VAC, 50 to 60 Hz (auto-select)
40 W @ 1/8 max power (IEC 60065)
Black anodized aluminum back plate
Dark gray MDF baffle, Silver foil
310 x 480 x 420mm / 900 x 310 x 420mm
(12.2” x 18,9” x 16.5” / 35.4” x 12.2” x 16.5”)
Depth incl. amp and driver: 447mm / 447mm (17.6” / 17.6”)
18 kg / 29 kg (39.6 lbs / 63.8 lbs)
250 W PWM amp
AIR Base-1 & AIR Base-2
Typical listening distance
AIR 6
1.2-2 m / 4-7 ft
Typical room size
AIR 6
50-100 m3 / 1600-3500 ft
AIR Base-1
30-60 m3 / 1000-2000 ft3
AIR 15
1.5-2.5 m / 5-8,5 ft
AIR 15
75-125 m3 /2600-4400 ft
AIR Base-2
50-100 m3 / 1600-4400 ft3
AIR 20
1.5-3 m / 5-10.2 ft
AIR 20
80-130 m3 / 2800-4600 ft3
Two or three AIR Base-1’s
50-100 m3 / 1600-3500 ft3
AIR 25
AIR 25
Two or three AIR Base-1’s
75-125 m3 / 2600-4400 ft3
Room & Distance
System sample rates
Internal sample rate
AIR Masters only
I/O Connectors
Formats
Word clock input
Display
Operation
Analog input option
Input connectors
Impedance
Selectable full scale input level
Dynamic Range
THD+N
Crosstalk
A to D Conversion
AIR Slaves only
I/O Connectors
192 and 176.4 via Dual Wire (optional Digital Card required) and
96, 88.2, 64, 48, 44.1 or 32 kHz
XLR (2 channels AES/EBU in) 3 x RJ45 proprietary TC LINK
AES/EBU (24 bit)
BNC, 75 ohm, 0.6 to 10 Vpp
2 x 16 character dot matrix
Menu system / four buttons
XLR balanced (pin 2+, pin 3-)
10/3 k Ohm (Balanced/unbalanced)
+9, +15, +21, +27 dBu
> 113 dB typ. (unweighted), BW: 20-20kHz
< -105 dB typ. @ 1 kHz, -3 dBFS
< -120 dB, 20 Hz to 20 kHz
24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
2 x RJ45 proprietary TC LINK
General specifications for AIR 6, AIR 15, AIR 20, AIR 25, AIR Base-1 & AIR Base-2
General for all Products
EMC complies with:
Safety certified to:
Environment operating Temperature:
Storage Temperature:
Humidity:
Warranty
EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B
IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE
#LR108093
32° F to 122° F (0° C to 50° C)
-22° F to 167° F (-30° C to 70° C)
Max. 90 % non-condensing
2 years on parts and labor
Air_US_rev_111.qxd 16-12-2004 14:18 Page 54