Filter
Top Products
ENGLISH
Getting Started Connections Setup Playback Setting the Timer Other Functions Troubleshooting Specifi cations
Disconnecting the iPod
To Switch the Display
During playback, press [TIME/DISPLAY].
The display switches each time the button is pressed.
Elapsed time of
currently playing track
Album title Artist nameTitle name
1
Press ON/STANDBY to set the standby mode.
2
Remove the iPod from the control dock for iPod.
NOTE
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.
Browse mode
Operating mode that shows iPod information on the RCD-CX1
display.
In this mode, it is not possible to operate the iPod directly or to
perform the operations associated with the slide show function. Set
the Remote mode to play slide shows.
Remote mode
This mode is for operating the iPod directly while watching the
information displayed on the iPod’s screen.
Also see the control dock for iPod operating manual regarding
connection and operation.
[5/ENTER]
[MENU/SET]
ON STANDBY
[2/u]
[8/i]
[TIME/DISPLAY]
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Recording
1
Press
<SOURCE>
to choose the input source to be
recorded.
2
Set the recorder to the recording mode.
b For instructions on operating, see the operating instructions of the
connected component.
3
Start playback on the player.
b For instructions on operating, see the operating instructions of the
connected component.
• The LINE2 input signal is not output to the recording output terminal
(REC).
• Adjusting the volume or tone does not affect the sound being
recorded.
Recording on an External Device
First connect the device from which you want to record to the
RCD-CX1 (vpage 9).
ON/STANDBY
<SOURCE>
Playback
1.RCD-CX1E3_ENG.indd 19 2008/06/30 11:12:51