Denon AVR-2803 Stereo System User Manual


 
58
Tone control setting
Use the tone control setting to adjust the bass and treble as desired.
To operate the tone control from the remote control unit.
The tone control setting only affects the front speakers.
If the tone control function is used, the main volume cannot be adjusted up to 18 dB. (The maximum main volume level differs in the
different surround modes.)
1
Display the surround parameter
screen on the monitor.
The screen for the selected
surround mode appears.
TONE cannot be selected
in the Direct mode.
2, 3, 4
1, 6
5
2
Select TONE.
3
Switch to the Tone Control
screen.
Select Tone Defeat OFF.
4
5
Enter the setting.
The surround menu screen re-appears.
6
To end the setting mode, press the surround parameter button again.
To select Bass or Treble. To set the level.
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)