Filter
Top Products
57
• Operating the surround mode and surround parameters from the main unit‘s panel.
1
Turn the SELECT knob to select the surround mode.
SELECT
• When turned clockwise
• When turned counterclockwise
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 60.)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
1 2 1,3
(Main unit)
(Main unit)
To select the surround mode while adjusting the surround parameters or tone control, press the surround mode button then operate
the selector.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DTS NEO:6 modes and the input signal switches to a digital
signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode
automatically switches to DTS surround.
(Main unit)
DIRECT STEREO DOLBY PRO LOGIC II DTS NEO:6 5/7CH STEREO
DIRECT STEREO DOLBY PRO LOGIC
II DTS NEO:6 5/7CH STEREO
MONO MOVIE
MONO MOVIE
ROCK ARENAJAZZ CLUBVIDEO GAMEMATRIXVIRTUAL
ROCK ARENAJAZZ CLUBVIDEO GAMEMATRIXVIRTUAL