Denon AVR-890 Home Theater System User Manual


 
2
ENGLISH
Getting Started Connections Playback Remote Control Information Troubleshooting Specifi cationsMulti-Zone
Setting items
Setting contents
Amp Assign
Sets the signal output to the
speaker connected to the
SURR. BACK/AMP ASSIGN
terminals.
Normal : The surround back channel audio signals are output.
ZONE2 : The ZONE2 audio signals are output.
Front A Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp
playback of the front A speakers.
Front B Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp
playback of the front B speakers.
Front Height : The front height channel audio signals are output.
Speaker Confi g.
Select speaker confi guration
and size.
(bass reproduction capability)
NOTE
Select “Large” or “Small” not
according to the physical size
of the speaker but according
to the low frequency
reproduction capabilities
based on the frequency set
at “Crossover Frequency”
(vpage 29).
Front : Set the front speaker size.
Large : Use of a large speaker that can adequately play back low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
If “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
Center : Set the presence and size of the center speaker.
Large : Use of a large speaker that can adequately play back low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when a center speaker is not connected.
“Large” is not displayed when “Front” is set to “Small”.
Even if “Center” has been set to “Large”, when “Front” is set to
“Small”, the “Center” setting automatically switches to “Small”.
Subwoofer : Set the presence of a subwoofer.
Yes : Use a subwoofer.
No : Select when a subwooofer is not connected.
When “Front” is set to “Small”, “Subwoofer” can automatically set
to “Yes”.
Use this procedure to set the speakers manually or if you wish to change the settings made with
Audyssey Auto Setup.
Making the speaker settings (Speaker Setup)
Default settings are underlined.
Use this procedure to change Audyssey™ Auto Setup settings or to change the various audio,
video and display settings.
The set can be used without changing these settings. Make these settings as necessary.
For a description of “Menu Map” and operating instructions, see page 20.
Items that can be set with the Manual Setup proceduren
Making the speaker settings (Speaker Setup) vpage 27
Making the HDMI settings (HDMI Setup) vpage 30
Making the audio settings (Audio Setup) vpage 30
Making other settings (Option Setup) vpage 32
Making the ZONE2 settings (ZONE2 Setup) vpage 31
n Examples of Menu Screen Displays
Speaker Setup HDMI Setup Audio Setup
MANUAL SETUP
SPEAKER SETUP
Amp Assign
Speaker Config.
Bass Setting
Distace
Channel Level
Crossover Frequency
Front Speaker Setup
Assign surround back AMP for other use
MANUAL SETUP
HDMI SETUP
lamroNegnaRBGR
Auto Lip Sync ON
PMAtuOoiduA
FFOlortnoCIMDH
RETURN Return
Use video range from 16 (black) to 235 (white)
MANUAL SETUP
AUDIO SETUP
EXT.IN SW Level
2ch Direct/Stereo
Auto Surround Mode
EQ Customize
Set subwoofer playback level in EXT. IN mode
ZONE2 Setup Option Setup
MANUAL SETUP
ZONE2 SETUP
Bd0hcLleveL
Bd0hcRleveL
Volume Display Relative
FFOtimiLemuloV
Power On Level Last
lluFleveLetuM
RETURN Return
Adjust the left channel output level
MANUAL SETUP
OPTION SETUP
Volume Control
Source Delete
On-Screen Display
Quick Select Name
Zone Rename
Trigger Out
Remote ID Setup
232C Port
Make settings for volume control
: Moves the cursor (Up/Down/Left/Right)
: Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Making detailed settings (Manual Setup)
Settings