Filter
Top Products
20
ENGLISH
Getting Started
Connections Playback Remote Control Information Troubleshooting
SpecificationsMulti-Zone
With the AVR-890, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen.
M E N U
A u d i o / V i d e o A d j u s t
I n f o r m a t i o n
A u t o S e t u p
M a n u a l S e t u p
I n p u t S e t u p
A d j u s t v a r i o u s a u d i o a n d v i d e o p a r a m e t e r s
1
Press .
The menu is
displayed.
3
Press ui to
select the item
you want to
set, then press
p or
.
4
Use uio p to select the item,
then press to set.
b To return to the previous item, press o or
.
b Select “Default Yes”, then press
to
reset to the default setting.
5
Press .
The settings made up to
that point are entered and
the settings menu screen
turns off.
2
Press ui to
select the item
you want to
set, then press
p or
.
⇩
⇩
⇩
⇩
Items that only need to be set once
Set these for example upon purchase.
Once these items are set, there is no need to
set them again unless the speaker layout or the
connected speakers have been changed.
n Operations
Setting menusn
Setting items Detailed items Description Page
Audio/Video Adjust
Adjust various audio/video
parameters.
Audio Adjust Adjust various audio parameters. 46
Picture Adjust Adjust various video parameters. 51
Information
Show information about receiver
settings, input signals, etc.
Status Shows information about current settings. 51
Audio Input Signal Shows information about audio input signals. 51
HDMI Information Displays the HDMI input/output signals and TV information. 51
Auto Surround Mode Displays the settings stored for the auto surround mode. 51
Quick Select Displays the settings stored for the Quick Select function. 51
Preset Channel Shows information about preset channels. 51
Auto Setup
Makes the optimum speaker
settings and corrects for the acoustic
characteristics of the room.
Audyssey™ Auto
Setup
Makes the optimum settings for the speakers being used
automatically.
22
Parameter Check Check Audyssey Auto Setup measurement results.
This item is only displayed after Audyssey Auto Setup has been
performed.
26
Manual Setup
Use this to make various types of
detailed settings.
Speaker Setup Sets the speaker size and distance, the channel level, etc. 27
HDMI Setup Make settings for HDMI video/audio output. 30
Audio Setup Make settings for audio playback. 30
ZONE2 Setup Make settings for audio playback in a ZONE2 system. 31
Option Setup Make various other settings. 32
Input Setup
Use this to make settings related to
playing input sources.
Input Assign Change input connector assignment. 35
Video Makes the video settings. 36
Input Mode Sets the audio input mode and decode mode. 37
Rename Change the display name for this source. 37
Source Level Adjust the playback level of the audio input. 38
iPod Playback Mode Make settings for iPod playback. 38
Auto Preset Use the auto preset function to program radio stations. 38
Preset Skip
Set the preset memories that you do not want to display when tuning.
38
Preset Name Assign name to a preset memory. 38
Parental Lock Set the channel radio reception limits. 39
Antenna Aiming Check the SIRIUS radio reception sensitivity. 39
Front
Settings
Menu Map
Settings