Denon AVR-2802/982 Stereo Receiver User Manual


 
ENGLIS
65
17
SPECIFICATIONS
2 Audio section
Power amplifier
Rated output: Front: 90 W + 90 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
135 W + 135 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Center: 90 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
135 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Surround: 90 W + 90 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
135 W + 135 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Surround Back: 90 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
135 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Dynamic power: 120 W x 2 ch (8 /ohms)
170 W x 2 ch (4 /ohms)
200 W x 2 ch (2 /ohms)
Output terminals: Front: A or B 6 ~ 16 /ohms
A + B 8 ~ 16 /ohms
Center, Surround, Surr. Back: 6 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +0, 3 dB (DIRECT mode)
S/N: 102 dB (DIRECT mode)
Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
Digital
D/A output: Rated output 2 V (at 0 dB playback)
Total harmonic distortion 0.008% (1 kHz, at 0 dB)
S/N ratio 102 dB
Dynamic range 96 dB
Digital input: Format Digital audio interface
Phono equalizer (PHONO input REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 7 V
Distortion factor: 0.03% (1 kHz, 3 V)
2 Video section
Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +0, 3 dB
S-video jacks
Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms
C (color) signal 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +0, 3 dB
Color component video jacks
Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms
P
B/CB
(blue) signal 0.7 Vp-p, 75 /ohms
P
R/CR
(red) signal 0.7Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 27 MHz +0, 3 dB
2 Tuner section
[FM] (note: µV at 75 /ohms, 0 dBf=1 x 10
15
W) [AM]
Receiving Range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB
STEREO 72 dB
Total Harmonic Distortion (at 1 kHz): MONO 0.15%
STEREO 0.3%
2 General
Power supply: AC 120 V, 60 Hz
Power consumption: 5.0 A
2 W Max (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 416 (D) mm (17-3/32 x 6-11/32 x 16-3/8)
Weight: 11.5 kg (25 lbs 6 oz)
2 Remote control unit (RC-903)
Batteries: R6P/AA Type (three batteries)
External dimensions: 70 (W) x 215 (H) x 24 (D) mm (2-3/4 x 8-15/32 x 15/16)
Weight: 200 g (Approx. 7 oz) (including batteries)
*
For purposes of improvement, specifications and design are subject to change without notice.