Denon AVR-2802/982 Stereo Receiver User Manual


 
ENGLIS
45
Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL).
(see page 24).
FUNCTION
VDP
2
(Main unit) (Remote control unit)
w Set the input mode to AUTO or DTS.
INPUT MODE
INPUT MODE
(Main unit) (Remote control unit)
2
Select the Dolby/DTS Surround mode.
SURROUND
DOLBY / DTS
When performing this operation from the main units panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logic or DTS NEO:6.
SURROUND
MODE
(Remote control unit)
SELECT
13
VOLUME LEVEL
B
13
2
4,5 2,6
DVD
START LEARNED/TX
SPEAKER
TUNING
BAND
TITLE
MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI DVD
SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND
DIRECT
DSP SIMULATION
5CH / 6CH STEREO
STEREO
INPUT MODE
ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
SYSTEM CALL POWER
VDP TUNER SHIFT
TV/DBS PHONO
VCR-1 CD CHANNEL
VCR-2/V.AUX
TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD
MULTI
CDR/MDTAPE
SYSTEM
SETUP
SURROUND
PARAMETER
CH SELECT
SELECT
RC-903
123
4
SET
A / B
CALL OFF
ENTER
ON
/
SOURCE
56
789
+10
0
1
2
1
5
4
6
CDR
/
TAPE
(Main unit) (Main unit)
3
Play a program source with the , mark.
DIGITAL
The DTS indicator lights when playing
DTS sources.
Light
Light
SIGNAL
DETECT
The SIGNAL DETECT LED lights
when playing DTS-ES/6.1-channel
surround sources containing the
identification signal.
Light
When the SIGNAL DETECT LED is lit, we recommend
turning the surround back channel using the 6.1/7.1
Surround button on the remote control unit and main unit
during playback.
The Dolby Digital indicator lights
when playing Dolby Digital sources.
Operate the 6.1/7.1 Surround button to switch Surround Back
CH ON/OFF.
6.1 / 7.1
SURROUND
(Main unit)
SURROUND
BACK CH
OUTPUT
Lights when the 6.1/7.1 Surround
mode is on.
Light