Denon AVR-2309CI Stereo System User Manual


 
Symptom Cause Countermeasure Page
No picture
appears.
• The connections between the
AVR-2309CI and monitor are
faulty.
• The monitor’s input setting is
wrong.
• PURE DIRECT mode is set.
• The player is connected using the
component input connectors, the
monitor is connected using the
video (yellow) or S-Video output
connectors.
• Check the connections.
• Set properly.
• Cancel the PURE DIRECT mode.
• High definition (1080i/720p) and
progressive (480p/576p) video
signals are not down-converted.
Set the player to interlace
(480i/576i) signals.
12 ~ 16
46
Picture cannot be
recorded.
• Input source does not match
recorder’s video connection
connector (video or S-Video).
• The video conversion function
does not work for the REC
OUT connectors. Match the
input source and recorder
connections.
15
DVDs cannot be
copied on a VCR.
• This is not a malfunction. Most
movie software includes copy
prevention signals and cannot be
copied.
On-screen
display is not
shown.
• The operation content display is
“OFF”.
• The main volume display is
“OFF”.
• The display during tuner operation
is “OFF”.
• The display during iPod operation
is “OFF”.
• When viewing HDMI or
component video signals via
the AVR-2309CI, the on-screen
display appears when the
MENU button on the main unit or
the A.MENU button on the main
remote control unit.
• When only HDMI or component
video signals are input to the
AVR-2309CI, the characters of
the on-screen display are not
displayed over the picture.
• Set “Manual Setup” - “Option
Setup” - “On-Screen Display” -
“Text” to “ON”.
• Set “Manual Setup” - “Option
Setup” - “On-Screen Display” -
“Master Volume” to “ON”.
• Set when “Manual Setup” -
“On-Screen Display” - “Tuner
Information”is not “OFF”.
• Set when “Manual Setup” -
“On-Screen Display” - iPod
Information” is not “OFF”.
9
9
36
36
36
36
GVideoH
Symptom Cause Countermeasure Page
HDMI audio
signals are not
output from
speakers.
• The “Manual Setup” – “HDMI
Setup” – “Audio” setting is set
to“TV”
• Set to “Amp” 32
No picture
appears
with HDMI
connections.
• The connections to the HDMI
connectors are faulty.
• HDMI input setting is improper.
• The monitor is not compatible
with copyright protection
(HDCP).
• The HDMI format of the player
and monitor do not match.
• Check the connections.
• Check the HDMI input setting.
• Connect a monitor that is
compatible with copyright
protection (HDCP).
• Match the HDMI format of the
player and monitor.
12
42
12
12
No sound is
output from
the monitor
connected
with HDMI
connections.
• The “Manual Setup” – “HDMI
Setup” – “Audio” setting is set to
“Amp”.
• Set to “TV”. 32
When performing
the following
operations on a
connected device,
AVR-2309CI
has the same
operations.
Power ON/OFF
Switching audio
output devices
Adjust volume
Switch input
source
• HDMI’s CEC function is
operating.
• Set “Manual Setup” - “HDMI
Setup” - “HDMI Control” to
“OFF”.
When you only want to operate
the power on/off each device, set
“Power Off Control” to “OFF”.
32
GHDMIH

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH