Filter
Top Products
• When a digital signal is properly input, the “ ” indicator lights on
the display. If the “ ” indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to “EXT.
IN”.
• Only set “PCM” and “DTS” when playing the respective signals.
Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Decode Mode
Set the decode mode for this source.
[Input source]
CD
CDR/TAPE
DVD
HDP
TV/CBL
VCR
V.AUX
[Selectable items]
Auto
: Detect type of digital input signal and decode and play
automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
• This can be selected for input sources for which the menu “Assign”
setting is set to “HDMI” or “Digital In” (vpage 42).
• Only set “PCM” and “DTS” when playing the respective signals.
Operating from the main unit or main remote
control unit
Press <INPUT MODE> or [INPUT].
Each time you press the button, the input mode display will change.
Auto HDMI Digital
AnalogEXT. IN
z1: This can be selected for input sources for which the menu
“Assign” setting is set to “HDMI”.
z2: This can be selected for input sources for which the menu
“Assign” setting is set to “Digital In” (vpage 42).
z1 z2
h Rename
Change the display name for this source.
Names containing up to 8 characters can be input.
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! # % & ’ ( ) * + , - . / : ; = “ ? @ [ \ ] (space)
[Variable range]
–12dB
~
0dB
~
+12dB
For input sources for which “HDMI” and “Digital In” are set at the
menu “Assign” setting, the analog input level and digital input level
can be set separately.
j Source Level
Corrects the playback level of the selected input source’s audio
input.
g Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
“Assign” setting (vpage 42).
Input Mode
Set the input mode for this source.
[Input source]
TUNER
PHONO
[Selectable items]
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
[Input source]
XM
[Selectable items]
Auto
: Automatically detect input signal and perform playback.
EXT. IN
: Play only signals from EXT. IN input.
[Input source]
CD
CDR/TAPE
DVD
HDP
TV/CBL
VCR
V.AUX
SIRIUS
[Selectable items]
Auto
: Automatically detect input signal and perform playback.
HDMI
z1
: Play only signals from HDMI input. (Excluding CD and
CDR/TAPE)
Digital
z2
: Play only signals from digital input.
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
z1: This can be selected for input sources for which the menu
“Assign” setting is set to “HDMI”.
z2: This can be selected for input sources for which the menu
“Assign” setting is set to “Digital In” (vpage 42).
Default
Resets the settings to the default values.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 22).