Filter
Top Products
71
Operating the connected devices by remote control unit
Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.
Operating AV devices
1
Press the input source select
button (vpage 18).
The operation mode of the remote
control unit is switched as shown in the
table.
Input source
select button
Input
source of
this unit
Operation mode
Devices controllable with the
remote control unit
– This unit (AMP-operation)
z2
z1
BD
Device registered on the
BD
button
z1
SAT/CBL
Device registered on the SAT/CBL
button
z1
TV
Device registered on the
TV
button
USB/iPod
iPod connected to the USB port or
control dock for iPod.
z1
DVD
Device registered on the
DVD
button
z1
V.AUX
Device registered on the
V.AUX
button
DOCK Control dock for iPod
TUNER Radio of this unit
z1
GAME
Device registered on the
GAME
button
z1 If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
z2 This operation mode enables you to operate iPod, USB, Control
dock for iPod and TUNER.
When the SOURCE SELECT is pressed, the AMP-operation mode
starts automatically.
NOTE
If the mode of the remote control unit is set to other than AMP-
operation mode, press AMP to switch the remote control unit to the
AMP-operation mode to perform the following operations:
•For menu operation by pressing MENU
•For setting the channel level of the unit by pressing CH LEVEL
2
Operate this unit or the device whose input source is
switched.
•For details, refer to the operating instructions for each device.
For operations of iPod, TUNER and USB memory device, see the
following pages.
•iPod (vpage23, 24)
•TUNER (vpage26)
•USB memory device (vpage28)
Basic version
Advanced version
Information
Advanced version