Filter
Top Products
IP ADDRESS—Automatically or manually assigns the IP address to the projector
connected to the network.
S
UBNET MASK—Configure the Subnet Mask of the network connection.
G
ATEWAY—Check the Gateway address with your network/system administrator if
you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator
if you configure it manually.
S
TORE—Press on the control panel or press
Enter
button on the remote control
to save the changes made in network configuration settings.
R
ESET NETWORK—Select Yes to reset network configuration.
INFORMATION
The Information menu displays the current projector settings.
OTHERS
The Others menu allows you to change settings for Menu, Screen, Audio, Power,
Security, and Closed Caption (for NTSC only). You can also perform Test Pattern
and Factory Reset.
Using Your Projector 41