Dell 1610HD Home Theater System User Manual


 
INPUT SELECT
The Input Select menu allows you to select your projector’s input source.
A
UTO SOURCESelect Off (the
default) to lock the current
input signal. If you press the
Source button when the Auto
Source mode is set to Off, you
can manually select the input
signal. Select On to auto detect
the available input signals. If
you press the Source button
when the projector is on, it
automatically finds the next
available input signal.
VGA-A—Press
on the control panel or press
Enter
button on the remote control
to detect VGA-A signal.
VGA-B—Press
on the control panel or press
Enter
button on the remote control
to detect VGA-B signal.
S-V
IDEOPress on the control panel or press
Enter
button on the remote
control to detect S-Video signal.
C
OMPOSITE VIDEOPress on the control panel or press
Enter
button on the
remote control to detect Composite Video signal.
HDMI—Press
on the control panel or press
Enter
button on the remote control
to detect HDMI signal.
A
DVANCEDPress on the control panel or press
Enter
button on the remote
control to activate Input Select Advanced menu.
INPUT SELECT ADVANCED
The Input Select Advanced menu allows you to enable or disable input sources.
VGA-A—Use and to enable or disable VGA-A input.
Using Your Projector 32