Filter
Top Products
Using the On-Screen Display
• The projector has a multi-language On-Screen Display (OSD) Menu that can be
displayed with or without an input source.
• To navigate through the tabs in the Main Menu, press the or buttons on
your projector’s control panel or remote control.
• To select a submenu, press the
button on your projector’s control panel or
press the
Enter
button on the remote control.
• To select an option, press the or buttons on your projector’s control panel
or remote control. The color changes to dark blue. When an item is selected, the
color changes to dark blue.
• Use the or buttons on the control panel or remote control to adjust the
settings.
• To go back to Main Menu, go to Back tab and press the button on the control
panel or press the
Enter
button on the remote control.
• To exit the OSD, go to EXIT tab and press the
button or press the Menu
button directly on the control panel or press the
Enter
button on the remote
control.
NOTE: Due to
Enter
button in place of the button on remote control, there is
no mark on remote now.
Main Menu
AUTO-ADJUST
Auto Adjust automatically adjusts the projector's Frequency and Tracking in PC
mode. While Auto Adjustment is in progress, the following message appears on
the screen:
Using Your Projector 31