Filter
Top Products
2
3
3
3
To power off the projector quickly, press the
Power
button and hold for 1 second
while the projector’s cooling fans are still running.
NOTE: Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
4
Disconnect the power cord from the electrical outlet and the projector.
Adjusting the Projected Image
Raising the Projector Height
1
Press the
Elevator
button.
2
Raise the projector to the desired display angle, and then release the button to
lock the elevator foot into position.
3
Use the tilt adjustment wheel to fine-tune the display angle.
Lowering the Projector Height
1
Press the
Elevator
button.
2
Lower the projector, and then release the button to lock the elevator foot into
position.
1
1 Elevator button
2 Elevator foot (Angle of tilt: 0 to 8 degree)
3 Tilt adjustment wheel
Using Your Projector 20