Filter
Top Products
PROCISE™ Surround Sound Amplifier Crestron PROAMP(I)-7X400
4. If necessary, double click a device to open the “Device Settings” window
and change the Net ID or IP ID, as shown in the following figures.
“Device Settings: Crestron PROAMP-7X400 (Cresnet)” Window
“Device Settings: Crestron PROAMP-7X400 (Ethernet)” Window
5. The ID code specified in the SIMPL Windows program must match the Net
ID or IP ID of each unit. Refer to “Identity Code” on page 10.
Program Manager
Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Example Program
An example program for the PROAMP-7X400 is available from the Crestron
website (
www.crestron.com/exampleprograms).
18 • PROCISE™ Surround Sound Amplifier: PROAMP(I)-7X400 Operations Guide – DOC. 6976A