Filter
Top Products
Crestron PROAMP(I)-7X400 PROCISE™ Surround Sound Amplifier
Locating the PROAMP-7X400 (Cresnet) in the Device Library
b. To incorporate the PROAMP-7X400 (Ethernet) into the system, drag
the drag the PROAMP-7X400 from the Ethernet Control Modules |
Ethernet Audio Modules folder of the Device Library and drop it in the
System Views.
Locating the PROAMP-7X400 (Ethernet) in the Device Library
2. The system tree of the control system displays the device in the appropriate
slot(s) with a default Net ID or IP ID as shown in the following illustration.
NOTE: In the following illustration, there is both an Ethernet device in
Slot 8 and a Cresnet device in Slot 9. It is possible to have both types of
device attached to a control system as long as the control system has either
a built-in or expansion Ethernet interface. If Cresnet operation is desired,
the IP table for the PROAMP-7X400 must be empty.
PROAMP-7X400 Device, Slots 8 and 9
3. Additional PROAMP-7X400 devices are assigned different Net ID or IP ID
numbers as they are added.
Operations Guide – DOC. 6976A PROCISE™ Surround Sound Amplifier: PROAMP(I)-7X400 • 17