Filter
Top Products
8
register your purchase! Having found the serial number, now would be a good time to fill out the registration
card. Please register your purchase so we can advise you of updates and other items of
interest.
It will take only a minute or so. Please complete the card now, before you forget.
warm up/break-in period Your new Classé surround processor will deliver outstanding performance immediately.
However, you should expect to hear it improve somewhat as it reaches its normal
operating temperatures and its various components “break-in.” It has been our
experience that the greatest changes occur within the first 300 hours, as the surround
processor reaches thermal equilibrium and the capacitors fully form. After this initial
break-in period, the performance of your new product should remain quite consistent
for years to come.
The only exception to this rule is if the unit is unplugged for an extended period of time,
allowing it to cool down. Depending on the degree of cooling involved, you should
expect a brief warm-up period before the surround processor’s sound quality is at its best.
Unless your surround processor was allowed to become quite chilled, subsequent thermal
re-stabilization should not take long. Fortunately, you should never have to repeat the
initial 300 hour break-in period.
please read this manual… Please take a few minutes to review this manual, and to familiarize yourself with your
new surround processor. We understand that you are anxious to plug everything in and
get started. However, reading this manual and following the advice it gives will ensure
that you get all the benefits you deserve from having purchased such a fine piece of
equipment.