Filter
Top Products
43
• high speed: determines the responsiveness of the control when the knob is being
turned slowly. A setting of 0 will cause the volume to change as slowly as possible
at high knob speeds; a setting of 100 will cause the volume to change as quickly as
allowed at high knob speeds. (The menu is the same as the one above except for the
indication that it is for the “high speed” adjustment.)
• speed limit: establishes a maximum rotary speed, beyond which there will be no
change in volume whatsoever; the knob’s input will be ignored completely until it
slows down below the speed limit.
• reset defaults: if after experimenting with various settings you decide you prefer it
the way it operated as it came from the factory, pressing this button will restore the
factory default settings. So feel free to experiment – you can always return to the
original settings.
max volume
The maximum volume screen allows you to establish a maximum volume setting for
your system. This scale runs from 0 to 100, with 100 indicating that you do not want
any artificial limit placed on the maximum gain your surround processor can provide.
This setting is interactive. You can set the value to something less than 100, and then
adjust the volume to see whether it is appropriate. (The volume knob itself does not set the
maximum volume; you must do so in the menu itself.)
startup volume Here you may select the level you prefer after the units wakes out of standby. This can be
configured 2 different ways:
• last volume is the last level selected before the unit was powered down.
Furthermore, the status of the mute will be remembered.
• specific allows you to select a favorite level with the mute on or off.