Filter
Top Products
42
Specifications
All specifi cations are accurate at the time of printing. Classé reserves the right to
adjust specifi cations without notice.
Frequency response 20 Hz – 200kHz ± 0.1dB
Distortion (THD + noise) 0.0012%
Maximum input voltage (single-ended) 5Vrms
Maximum input voltage (balanced) 10Vrms
Maximum output voltage (single-ended) 10Vrms
Maximum output voltage (balanced) 20Vrms
Gain range -86dB to +14dB
Input Impedance (single ended) 100kΩ
Input Impedance (balanced) 200kΩ
Output Impedance 100Ω
Maximum Input to Noise Floor 120dB
Channel separation 130dB at 1kHz
Crosstalk (any input to any output) better than -120dB @ 1kHz
Rated power consumption 42W
Idle power consumption 29W
Mains voltage determined by the needs of country for which
the unit was manufactured;
cannot be reset by dealer or user
Overall dimensions (preamplifier) Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
Overall dimensions (power supply) Width: 5” (127mm)
Depth: 12” (305mm)
Height: 5.5” (140mm)
Net weight (preamplifier) 23lbs (10.5kg)
Net weight (power supply) 10lbs (4.6kg)
Shipping weight 45lbs (20.5kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
Internet: http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.