Filter
Top Products
32
e remote Fkey menu has four buttons, one each for the four Fkeys on your
remote control. Pressing any of these buttons on the LCD touchscreen takes you
to a subordinate, scrolling list of possible functions for that particular Fkey.
Selecting the one you want is as simple as scrolling through the list (by touching
either the up or down arrows on the right), and then touching the specifi c
function in the list that you want that Fkey to perform.
cautionary note on Fkey use
Note that all Classé remote controls provide these same four Fkeys, so that you
need not worry about which remote you happen to pick up. us F1 on the
preamplifi er’s remote control sends the same infrared signal as F1 on the CD
player’s remote control.
While this is intended to minimize confusion amongst diff erent remotes (since
this aspect of them will all perform identically), you should take care when
assigning diff erent functions on diff erent components to the same Fkey. Doing
so would result in two components doing two diff erent things at once, in
response to a single press of a button on the remote control. is can sometimes
be useful. As an example, F1 could set the preamplifi er to the CD input, and
also set the CD player to Play, both from the press of a single Fkey.
status
e status screen provides several items of information about the current
operation status of the CP-700, as well as access to information on the software
used in and the internal sensors of the CP-700.
version info e version info button on the status screen takes you to the version
information screen, which displays information on various pieces of software
used by your CP-700. If you ever have occasion to call our technical support
people to ask a question not covered in this manual, they may want to know
precisely what version of software your unit is running. Having this information
available will help enable them to give you the best possible service.
sensors e sensors button on the status screen takes you to the sensors screen, which
displays information about several internal sensors within the CP-700. It is
unlikely you might ever need the sensor information, unless directed to do so by
a customer service representative at Classé in order to help troubleshoot some
unexpected problem.