Filter
Top Products
15
Rear Panel
1 Tape Input
Connect the analog outputs of any recording device (analog tape recorder,
digital tape recorder, CD recorder, etc.) you may have to these single-ended
RCA connectors. You may select to hear the output of your recording
device by touching the tape button on the main operational screen of the
CP-700.
2 Single-ended (RCA) inputs
ese RCA jacks accept right-channel and left-channel (single-ended)
inputs from line-level source equipment such as tuners, CD players,
and tape decks. Any of these inputs may be selected by touching the
corresponding button on the main operational screen of the front panel
touchscreen.
To achieve the best possible results, we suggest that you use only high-
quality, shielded interconnect cables. Please consult with your local Classé
dealer for advice on the best cables for use in your system.
optional phono preamp If you have a turntable you would like to use with the system, an optional
phono preamplifi er module is available from your Classé dealer. Once
installed in your preamplifi er, the Line 1 input connectors become your
phono inputs, and the phono gain control in the menu system becomes
active, allowing you to select either low gain for all moving-magnet
(MM) and high-output moving-coil (MC) cartridges, or high gain for
standard output MC cartridges. (See the section e Menu System for more
information.)
3 Balanced (XLR) inputs
ese XLR jacks accept right-channel and left-channel balanced signals
from source equipment with balanced outputs. Either of these inputs may
be selected by touching the corresponding button on the main operational
screen of the LCD touchscreen.