Filter
Top Products
21
• e Bal (balance) key takes you directly to the balance screen
in the menu system; once there, you can use the navigation keys
on the remote to select either the left or right buttons on the
LCD touchscreen, depending on which way you wish to move
the balance. Adjust the relative left-right balance of the system
by using the Enter key on the remote to “press” the appropriate
button on the display.
• Up/Down/Left/Right keys allow you to move within a
particular menu screen, changing the highlighted item up/down/
left/right as you like, from the comfort of your listening position.
• e Enter key allows you to select the highlighted item, having
the same eff ect as if you had pressed the button on the LCD
touchscreen.
• e Tape key is not a navigation key, per se, but allows you to
easily toggle between listening to the selected source and listening
to the output of your recording device. If you have a recording
device (such as a three-head tape deck) which can play back a
recording while it is being made, you will be able to compare the
original signal to the recording while you are making it.
4 Fkey Controls
e CP-700 remote control can also control user-defi ned functions as well.
e F1/F2/F3/F4 keys are available for controlling aspects of the CP-700
not covered by the other buttons on the remote control.
You are able to choose what the CP-700 should do in response to receiving
the infrared signal that a particular Fkey has been pressed. e list of
possible functions is quite extensive, and is found in the menu system (see
the next section in this manual, entitled e Menu System).
Note: The Fkeys on all Classé remote controls issue the same
infrared commands. This saves you from having to be
sure you have picked up the proper remote, since all your
Classé remotes will perform the same function for each
Fkey.