Classe Audio CDP-502 CD Player User Manual


 
46
Specifications
All specifi cations are accurate at the time of printing. Classé reserves the right to
adjust specifi cations without notice.
Frequency response
(balanced and single-ended) 8 Hz – 20 kHz +0/-0.4dB
Distortion (THD+noise) 0.001%
Output voltage (single-ended) 2Vrms
Output voltage (balanced) 4Vrms
Signal-to-noise ratio >110dBfs 22Hz - 22kHz A Weighted
Channel separation better than 115dB
D/A Converter 3x Burr Brown PCM 1792
Audio sample rate 192kHz
Formats supported CD, CD-R, CD-RW, DVD Audio, DVD Video,
VCD, SVCD, MP3, WMA, DVD-R, DVD+R,
DVD-RW, DVD+RW
Audio outputs 2 x RCA, 2 x XLR, Coax S/PDIF 1 x RCA,
AES/EBU 1 x XLR, Optical 1 x Toslink
Video outputs HDMI, Component (progressive scan),
S-Video, Composite
Internal Scaling 480i (via all video outputs),
480p (via component and HDMI)
720p/1080i/1080p (via HDMI)
Power consumption 72W
Mains voltage determined by the needs of country for which the unit
was manufactured; cannot be reset by dealer or user
Overall dimensions Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
Net weight 27 lb (12.3 kg)
Shipping weight 35 lb (15.9 kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
Internet: http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX
®
is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.