Filter
Top Products
28
remote Fkeys is button brings up the remote Fkeys menu.
e remote control supplied with your Classé product includes four user-
programmable function keys, or “Fkeys.” ey are labeled F1, F2, F3, and
F4, and are located near the bottom of the remote control. e “remote Fkeys”
menu allows you to defi ne how your CDP-502 will respond to seeing one of
these Fkey signals. You can use the Fkeys to give you instant access to specifi c
system functions that might otherwise be buried in a menu somewhere.
For example, if you use the shuffl e mode frequently, you may want to consider
programming one of the Fkeys to toggle that function on and off . Doing so will
save you having to access the control menu, followed by pressing the shuffl e
button (which might be hard to see from across the room, even though you could do
so from the remote control with an Fkey assignment).
e remote Fkey menu has four buttons, one each for the four Fkeys on your
remote control. Pressing any of these buttons on the LCD touchscreen takes you
to a subordinate, scrolling list of possible functions for that particular Fkey.
Selecting the one you want is as simple as scrolling through the list (by touching
either the up or down arrows on the right), and then touching the specifi c
function in the list that you want that Fkey to perform.
cautionary note on Fkey use Note that all Classé remote controls provide these same four Fkeys, so that
you need not worry about which remote you happen to pick up. us F1 on
the preamplifi er’s remote control sends the same infrared signal as F1 on the
CDP-502 remote control.
While this is intended to minimize confusion amongst diff erent remotes (since
this aspect of them will all perform identically), you should take care when
assigning diff erent functions on diff erent components to the same Fkey. Doing
so would result in two components doing two diff erent things at once, in
response to a single press of a button on the remote control. is can sometimes
be useful. As an example, F1 could set the preamplifi er to the CD input, and
also set the disc player to Play, both from the press of a single Fkey.