Classe Audio CDP-502 CD Player User Manual


 
29
status e status screen provides several items of information on the currently playing
disc, as well as access to information on the software used in and the internal
sensors of the CDP-502. While on this page, pressing the ‘more’ key will access
the CAN-Bus features.
version info e version info button on the status screen takes you to the version
information screen, which displays information on various pieces of software
used by your CDP-502. If you ever have occasion to call our technical support
people to ask a question not covered in this manual, they may want to know
precisely what version of software your unit is running. Having this information
available will help enable them to give you the best possible service.
sensors e sensors button on the status screen takes you to the sensors screen, which
displays information about several internal sensors within the CDP-502. It is
unlikely you might ever need the sensor information, unless directed to do so by
a customer service representative at Classé in order to help troubleshoot some
unexpected problem.
CAN-Bus Classé’s Controller Area Network, or CAN-Bus, opens the way to a new level
of interaction between our Delta range of amplifi ers, preamps, processors and
source components. When the CDP-502 is connected with CAN-Bus, the
diff erent elements of a Delta series system are in constant communication,
creating a “global” network that delivers system wide status information and
shared operational features, all through the touchscreen display.
features CAN-Bus will allow a single Delta series touchscreen to:
Display status information for every connected unit, including amplifi ers
which do not have a touchscreen display.
Create a “PlayLink” that allows an SSP or Preamp to automatically switch
to the correct input when a Delta series source component starts playback.
Adjust the global system brightness.
• Confi gure the entire system to go in and out of standby at the touch of a
button and also bring individual components in and out of standby.
Mute any connected unit.