Filter
Top Products
20
• Time cycles through the four time display modes:
time elapsed on track
time elapsed on disc
time remaining on track
time remaining on disc
• Prog (for Program) allows you to quickly and easily create a
programmed sequence of tracks (or chapters) to be played on the
current disc. Pressing Prog will take you directly to the program
page of the menu system, regardless of where you might be.
Once on the program page, you can change the highlighted track
using the Up and Down buttons, and can use the Enter button
to toggle whether it is included in the current program. Pressing
Prog a second time returns you to wherever you had been. (Note
that the program function is not available during play or pause,
only when the CDP-502 is in stop.)
• Vol (for Volume) buttons raise and lower the output level of the
CDP-502, assuming you are using the analog outputs in their
variable output mode. If you set the analog outputs to their
fi xed, line-level setting, or if you are using the digital output to
your preamplifi er/processor, these buttons will have no eff ect.
• Mute will engage the mute function of the CDP-502 as you have
defi ned it (either Classic, Specifi c, or Dampening; see e Menu
System for more details).
3 Navigation Keys
e central section of the remote control contains the navigation keys.
is array of keys is similar to what you may have seen on remote controls
for DVD players, and is used for navigation of the menu system of the
CDP-502.
• Setup serves two functions: it calls up the menu system when
you need it in order to adjust something to your preference;
once within the menu system, pressing Setup returns you to the
previous level of the menu system. If you press Setup when at
the top level of the menu system, it will take you back out of the
menu system to the normal display.
• Home returns you to the normal display of chapter/track, time,
and transport controls shown on the LCD screen on the front
panel of the CDP-502. is provides a quick way to get back to
normal operation, regardless of how deep you might be in the
menu system.
a note about DVD menus: The DVD standard supports two levels of menus:
1) a menu of available “titles” on the disc (e.g., the main movie,
plus extra “bonus” materials like documentaries, etc.);
2) each “title” then has a subordinate menu of chapters within the
title.