Filter
Top Products
27
teach IR e CDP-502 provides discrete infrared (IR) command codes for all its
functions, a list that extends far beyond what is required by normal remote
controls. However, many of these functions are critical if you plan to create
a customized remote control with macros that take command of your entire
system. Without these discrete codes, many of the macros you might want to
create will simply not work reliably.
e teach IR screen provides a scrolling list of all the available IR codes in the
CDP-502. By scrolling to the command your macro-capable remote needs to
learn, and then pressing the send IR code button, the CDP-502 will send the
appropriate command code out its front panel—where it can be learned by your
third-party remote control.
For more information on such control systems, we recommend you speak with
your authorized Classé dealer.
display setup is button brings up the display setup menu, which itself has subordinate
menus. For more detailed information, please see the display setup menu,
found later in this manual. (It allows you to confi gure the CDP-502’s LCD screen
brightness, the display timeout, the language used in the touchscreen and menu
system, the temporary display, and how volume settings are displayed if you use the
variable volume capability of the CDP-502.)
triggers Each of the CDP-502 DC Triggers may be programmed as to its “logic level,”
which is to say, whether its voltage is low (essentially 0V), or high (approximately
12VDC) when the trigger is activated. e ability to change the level of a
trigger’s on state can solve installation-specifi c problems that otherwise require
external devices that add to both the cost and complexity of your system.
If this seems an obscure point, that’s okay. It is a feature designed to solve
problems you may not even have, but your installation professional appreciates
being able to solve such problems when they occur.