Filter
Top Products
6
Unpacking and Placement
unpacking your CD player Carefully unpack your CD player according to the supplied instructions, and
remove all accessories from the carton.
Important! Keep all packing materials for future transport of your Classé
product. Shipping your new component in anything other than
its purpose-designed packing material may result in damage
that is not covered by the warranty.
placement As with any digital component, it is best to place the CDP-100 somewhat
apart from your most sensitive analog electronics, particularly turntables and
preamplifiers. Generally, placing it on its own shelf should suffice.
Note that adequate clearance for the AC cord and connecting cables
must be left behind the CDP-100. We suggest leaving eight inches (20
cm) of free space behind your CD player to allow all cables sufficient
room to bend without crimping or undue strain.
Classé recommends that the unit not be placed directly on the top surface of a
power amplifier (or any other heat source).
ventilation Your Classé CD player generates a certain amount of heat in the course of
normal operation. Be sure to allow three inches of clearance above it and three
inches to each side to allow heat dissipation through air circulation. Avoid
placement on soft surfaces that would restrict airflow (such as plush carpeting).
custom installations Drawings are included in this manual to facilitate special installations and
custom cabinetry (see the section Dimensions). An optional, purpose-designed
rack mount kit is available for this product. Contact your Classé dealer for more
information.
serial number The serial number for your CD player is found on the rear of the unit. Please
note and record this number on the page entitled Important Safety Instructions
for your future reference.