Filter
Top Products
17
The Remote Control
Your new CD player comes with a versatile remote control which can control
both the CDP-100 itself and several aspects of the rest of a Classé-based system.
The keys are arranged in logical groups according to their functions.
1 Basic Functions
This section along the top of the remote control groups four functions that
control your basic interactions with the CDP-100.
• Light switches the backlighting of the remote control on, for
better visibility under low-light conditions. After a few moments
of inactivity, the backlight switches off automatically.
• Info takes you directly to the status screen in the LCD menu
system, displaying several items of information about the
CDP-100 and its current operational status.
• Disp (for Display) cycles through the three brightness settings of
the screen display.
• Standby toggles the CDP-100 between standby and operate.
2 Numeric Keypad and Programming
The next section down on the remote control provides the numeric keypad
for use in directly accessing particular tracks on the CD you are playing, as
well as two keys that are frequently used in conjunction with the numeric
keys.
• The Numeric Keypad can be used to access specific tracks
directly from your remote control. Simply press the appropriate
number key (or keys) followed by the Play key. The CDP-100
will go directly to the track you keyed in and begin to play.
For example, to play track 12, press the
1, 2, and Play keys in
sequence.
• Time cycles through the four time display modes:
time elapsed on track
time elapsed on disc
time remaining on track
time remaining on disc
• Prog (for Program) allows you to quickly and easily create a
programmed sequence of tracks to be played on the current disc.
Pressing Prog will take you directly to the program page of the
menu system, regardless of where you might be.
Once on the program page, you can change the highlighted track
using the Up and Down buttons, and can use the Enter button
to toggle whether it is included in the current program. Pressing
Prog a second time returns you to wherever you had been. (Note
that the program function is not available during play or pause,
only when the CDP-100 is in stop.)
LIGHT
HOME MENU
MUTE
F1
ENTER
INFO
TIME PROG
PAUSE PLAY
A–BREPEAT STOP
DISP
STANDBY
F2
3
7
4 5 6
1 2
8 9 0
F3 F4